Shanghai, China, October 22, 2024 SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213), a technologically-advanced CMOS image sensor supplier, recently announced a new CMOS image sensor of SmartSens Star Light (SL) Series, the 4-MegaPixel (MP) SC485SL. Leveraging SmartSens’ advanced technologies including SmartClarity®-3, Lightbox IR®, and SmartAOV™ 2.0, SC485SL provides superior performance in high sensitivity, high dynamic range, low noise, imaging at high temperatures, low power consumption, etc., which makes it ideal for camera upgrades of intelligent security applications such as AI dark-light full-color cameras. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731054436759650965.png"/></div> Main featuresSmartAOV™ 2.0 technologyAs SmartSens’ first CIS to employ SmartAOV™ 2.0 technology, SC485SL supports Always-On Video (AOV). When a moving target is detected, the sensor is awakened quickly by built-in functions including AEC/AGC/AWB, and captures videos at a frame rate of 30fps. When a moving target is not detected, the sensor captures videos at a low frame rate of 1fps. Therefore, the AOV enables the camera system to capture all-day videos 24/7.Compared with its predecessor, the SmartAOV™ 2.0 technology has the following upgrades:· Enhanced image processing effect: the built-in AWB function of the CIS has been raised to 16x gain, which covers a wider range of the color temperature, thus achieving better image color restoration effects. · Optimized booting time: by decreasing the number of I2C configurations, the image transmission time of CIS is reduced, thereby accelerating its booting process. · Interrupt mode: CIS sends a logic level to the System-On-Chip (SoC) when the booting is completed. This interrupt mode is friendly for SoC, compared with the conventional polling mode (The SoC obtains the CIS’ booting status by reading the register). Low light imagingSC485SL utilizes SmartSens’ advanced technologies including SFCPixel®, Lightbox IR®, and multi-exposure HDR to achieve enhanced imaging performance in low-light or dark environments. SmartSens’ proprietary SFCPixel® technology and the BSI pixel structure equip the new image sensor to achieve growth in sensitivity and Quantum Efficiency (QE). At the 520nm wavelength of visible light, the QE of SC485SL is 15% higher than its predecessor. Meanwhile, Lightbox IR® provides significant improvement in the sensors’ Near-Infrared (NIR) sensitivity. Compared with its predecessor, SC485SL has a 1-time jump in QE at the 850nm wavelength, and a 1.6-time surge in QE at the 940nm wavelength, enabling its clear, accurate image capture in low light conditions.<div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731054798951947535.png"/></div>SC485SL employs CMS2, CM4, and 12-bit quantization modes, which can effectively reduce read noise, thus improving its dynamic range. Compared with its predecessor, SC485SL has a significant reduction of 38% in Read Noise (RN) and 10% in PRNU, respectively. The SNR1s of SC485SL is 39% lower than its predecessor. These enable the sensor to deliver detailed, accurate image output with low noise even in low light scenes such as underground parking lots, and outdoor places at night. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731054834139470532.png"/></div>The new sensor SC485SL supports ColGain HDR®, 2-exposure staggered HDR, and 3-exposure staggered HDR of up to 120dB, providing customers with options for their camera solution development. The sensor&#x27;s high dynamic range yields an image output with clear and rich highlight and shadow details in strong or low-light/illumination environments. Imaging at high temperaturesThanks to SmartSens’ advanced technologies such as SmartClarity®-3, etc., the new BSI sensor delivers optimized imaging performance at high temperatures. At a temperature of 80°C, SC485SL has significant reductions of 73% in DarkCurrent (DC), and 40% in White Pixel (WP) when compared with similar stacked BSI CIS in the industry, thereby enabling its high-quality, stable image output in high-temperature environments. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731054863034319161.png"/></div>Low power consumptionThe precise control of internal modules equips SC485SL to achieve ultra-low power consumption. The SC485SL image sensor supports three output formats, including 30fps, 60fps, and 90fps. The power consumption of SC485SL is less than 300mW@90fps and 210mW@60fps respectively, which provides effective power savings for the whole camera system. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731054884959287911.png"/></div>SC485SL is sampling now and will be mass-produced in Q4 2024. For more information or to request a sample, please contact SmartSens Sales Representatives: cs@smartsenstech.com About SmartSens Technology (Shanghai) Co., Ltd.SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213) is a high-performance CMOS image sensor (CIS) chip design company. It is headquartered in Shanghai and has research centers in many cities around the world. SmartSens has been dedicated to pushing forward the frontier of imaging technology and growing in popularity among customers since it was established. SmartSens’ CMOS image sensors provide advanced imaging solutions for a broad range of areas such as surveillance, machine vision, automotive and cellphone cameras. SmartSens is committed to continuous innovation of products and fueling growth in numerous industries by delivering a more comprehensive portfolio of image sensors. Learn more at SmartSensTech.com.

SmartSens Adds New 4MP CMOS Image Sensor to Its SL Series for Intelligent Security Applications

Shanghai, China, September 10, 2024 SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213), a technologically-advanced CMOS image sensor supplier, recently announced two new CMOS image sensors (CISs), the 6-MegaPixel (MP) SC635HAI and the 5MP SC532HAI. Employing SmartSens’ advanced technologies including SmartClarity®-3, Lightbox IR®, ColGain HDR®, SmartAOV™, etc., the two new BSI image sensors feature high sensitivity, High Dynamic Range (HDR), imaging at high temperatures, low power consumption, and Always-On Video (AOV), delivering 3K resolution video output with excellent imaging performance for security and IoT applications. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731055954390857691.png"/></div>Main features Low light imagingBoth SC635HAI and SC532HAI utilize SmartSens’ advanced technologies including Lightbox IR® and multiple HDR technologies to achieve enhanced imaging performance in low light conditions.SmartSens’ proprietary SFCPixel® and Lightbox IR® technologies provide both BSI image sensors with significant improvement in sensitivity and Quantum Efficiency (QE). Take SC635HAI as an example. At the 520nm wavelength of visible light, the QE of SC635HAI is more than 14% higher than its predecessor. The QE of SC635HAI at 850nm and 940nm wavelength are 26% and 21% higher than its predecessor, respectively. Meanwhile, the SC635HAI image sensor has a reduction of 30% in Read Noise (RN) and 17% in PRNU, compared with its predecessor. Therefore, the new image sensor provides clear, low-noise image capture even in low light conditions. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731055995147607993.png"/></div>The two new sensors support 2-exposure staggered HDR and ColGain HDR® modes, which provide significant improvement in dynamic range, yielding high-quality, artifact-free image output with rich highlight and shadow details. Imaging at high temperaturesUsing SmartSens’ advanced technologies such as SmartClarity®-3, etc., the two sensors deliver optimized imaging performance at high temperatures. Take SC532HAI as an example. At a temperature of 80°C, SC532HAI has significant reductions of 63% in DarkCurrent (DC), 70% in Dark Shading, and 25% in White Pixel (WP) when compared with its predecessor, thereby enabling its high-quality, stable image output in high-temperature environments. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731056028797337366.png"/></div>Low power consumptionThe precise control of internal modules equips the two new sensors to achieve low power consumption. The power consumption of SC635HAI is less than 260mW at 60fps and less than 120mW at 30fps, respectively, which effectively saves power and reduces the heat of the whole camera during all-day operation. Always-On Video (AOV)Both SC635HAI and SC532HAI support Always-On Video (AOV). When a moving target is detected, the sensor is awakened quickly and captures videos at a frame rate of 30fps. When a moving target is not detected, the sensor captures videos at a low frame rate of 1fps. Therefore, the AOV enables the camera system to capture all-day videos 24/7, which also provides power savings for battery-powered devices such as home IoT cameras, 4G solar cameras, etc.In addition, both sensors are pin-to-pin compatible (SC635HAI:41pin; SC532HAI:35pin), which enables customers to achieve camera upgrades seamlessly. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1731056076169436567.png"/></div>SC635HAI and SC532HAI are sampling now and will be mass-produced in Q4 2024. For more information or to request a sample, please contact SmartSens Sales Representatives: cs@smartsenstech.com About SmartSens Technology (Shanghai) Co., Ltd.SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213) is a high-performance CMOS image sensor (CIS) chip design company. It is headquartered in Shanghai and has research centers in many cities around the world. SmartSens has been dedicated to pushing forward the frontier of imaging technology and growing in popularity among customers since it was established. SmartSens’ CMOS image sensors provide advanced imaging solutions for a broad range of areas such as surveillance, machine vision, automotive and cellphone cameras. SmartSens is committed to continuous innovation of products and fueling growth in numerous industries by delivering a more comprehensive portfolio of image sensors. Learn more at SmartSensTech.com.

SmartSens Announces Two New High-Resolution CMOS Image Sensors for Security and IoT Applications

Shanghai, China, August 8, 2024 SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213), a technologically-advanced CMOS image sensor supplier, recently announced its new sub-brand, Flyingchip, and Flyingchip M1 Series vision processing chips for automotive cameras. M1 Camera ISP, M1Pro Camera SoC, and M1Max Camera SoC of the Flyingchip M1 Series family deliver excellent performance in image processing, low power consumption, ultra-small package size, functional safety, information security, etc., enabling enhanced vision pre-processing and imaging performance for automotive cameras, thus making them ideal for developing high-precision, low-latency automotive imaging solutions.<div class="media-wrap image-wrap align-center" style="text-align:center"><img class="media-wrap image-wrap align-center" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1728884529909048700.png"/></div>M1 Camera ISPAs Flyingchip’s first automotive camera Image Signal Processor (ISP), M1 has the following advantages in image processing:· Noise reduction and image enhancement algorithms for low light imaging. This high-performance function helps improve the clarity of real-time images, which further results in an increased accuracy of vision recognition for intelligent driving systems.· High-resolution RGB-IR image processing. Featuring RGB-IR processing, the M1 camera ISP can be used with an RGB-IR image sensor, which becomes an ideal solution for automotive cameras used on Occupant Monitoring Systems (OMS).· At most 4-exposure HDR with a dynamic range of up to 144dB. High dynamic range maintains image highlight and shadow details, thereby ensuring the accuracy of the image capture under complex lighting conditions during the drive.· LED Flicker Suppression (LFS). The LFS technology resolves the image flickering caused by LED light sources such as digital traffic signs/signals, providing accurate, real-time image data for ADAS applications.· Dual 3MP@30fps HDR image processing. This dual image processing pipeline is ideal for automotive multi-cam applications such as in-cabin stereo cams and front-view stereo cams.<div class="media-wrap image-wrap align-center" style="text-align:center"><img class="media-wrap image-wrap align-center" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1729236792687927206.png"/></div>In addition, M1 comes in two package size options, including 9mm*9mm (QFN) and 7mm*7mm (BGA), which enables size-shrinking automotive camera solutions.M1Pro Camera SoCThe M1Pro integrates an advanced ISP, proprietary Neural Processing Unit (NPU), and embedded Arm® Cortex®-A7 Central Processing Unit (CPU), with 1Gb DDR3L memory. Flyingchip’s proprietary Neural Processing Unit (NPU) used on M1Pro incorporates upgraded Convolutional Neural Networks (CNNs), delivering a dedicated processing performance of up to 0.8TOPS at INT8 precision for improved accuracy and speed of image data processing. Take M1Pro’s automotive imaging solutions for Driver Monitoring Systems (DMS) cameras as an example. Thanks to the M1Pro’s built-in ISP and the high-performance image sensor, the M1Pro camera SoC can be used with SmartSens’ 2MP global shutter image sensor SC232AT, achieving an increased dynamic range for better image quality under the global shutter mode. Meanwhile, M1Pro supports on-device execution and output of DMS recognition algorithms, which effectively improves the efficiency of DMS for ensuring driving safety.<div class="media-wrap image-wrap align-center" style="text-align:center"><img class="media-wrap image-wrap align-center" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1728884856693175400.png"/></div>M1Max Camera SoCCompared with the M1Pro of the Flyingchip M1 Series family, the M1Max Camera SoC incorporates the following upgraded functions, including Flyingchip’s proprietary 1.5TOPS@INT8 NPU, Arm® Cortex®-A7 ×2 CPU with 2Gb DDR3L memory, delivering advanced performance in image data processing, thereby meeting the needs of on-device vision processing for intelligent driving systems.<div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1729236831177627502.png"/></div>In addition, Flyingchip M1 Series products are all AEC-Q100 Grade 2 and ISO26262 ASIL-B compliant, which can further ensure the stable operation of automotive vision processing and computation.“With the rapid penetration of L2 and L2+ assisted driving functions, automotive vision systems are evolving towards higher resolution and dynamic range while automotive multi-cam systems require more advanced algorithms and computational power for synchronized image processing from multiple camera inputs,” said Mr. Kevin Shao, Vice President of SmartSens Technology and Chief Executive Officer of Flyingchip Technology. “Flyingchip M1 Series chips deliver excellent performance in image processing, low power consumption, ultra-small package size, functional safety, information security, etc., which can be used with multiple SmartSens’ automotive image sensors, providing a variety of high-performance, cost-effective automotive vision solutions for automotive manufacturers, thus accelerating the development of vision systems for intelligent automobiles.”Flyingchip M1 Series products, including M1 Camera ISP, M1Pro Camera SoC, and M1Max Camera SoC, are now available for sampling. For more information or to request a sample, please contact info@flyingchipmicro.comAbout SmartSens Technology (Shanghai) Co., Ltd.SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213) is a high-performance CMOS image sensor (CIS) chip design company. It is headquartered in Shanghai and has research centers in many cities around the world. SmartSens has been dedicated to pushing forward the frontier of imaging technology and growing in popularity among customers since it was established. SmartSens’ CMOS image sensors provide advanced imaging solutions for a broad range of areas such as surveillance, machine vision, automotive and cellphone cameras. SmartSens is committed to continuous innovation of products and fueling growth in numerous industries by delivering a more comprehensive portfolio of image sensors. Learn more at SmartSensTech.com.

SmartSens Unveils Its New Sub-Brand Flyingchip with M1 Series Vision Processing Chips for Automotive Cameras

Shanghai, China, July 31, 2024 SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213), a technologically advanced CMOS image sensor supplier, recently announced SC535HGS, a 5-MegaPixel (MP) global shutter near-infrared enhanced CMOS Image Sensor (CIS) for industrial machine vision cameras. Utilizing Smartsens’ advanced SmartGS®-2 Plus and Lightbox IR®, this BSI global shutter CIS provides superior performance in high sensitivity, high resolution, high SNR, and low power consumption. The SC538HGS has high sensitivity in both visible and near-infrared light wavelengths, which makes it ideal for industrial applications such as indoor motion capture and new energy materials inspection.<div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1723186131682564778.png"/></div>Main features High SensitivityAs an industrial area CMOS image sensor, the BSI global shutter SC538HGS is equipped with near-infrared enhancement technology to achieve high sensitivity in visible and near-infrared light. The peak QE of SC538HGS in the 520nm wavelength is up to 92.3%, which is about 17.3% higher than similar products in the industry. Moreover, its peak QE in the 850nm and 940nm wavelength is about 17.5% and 8.6% higher than that of its predecessor respectively. The significantly improved sensitivity enables the SC538HGS to capture clear images even under complex lighting conditions. High Signal-to-Noise RatioThe advanced SmartGS®-2 Plus technology and excellent pixel structure design enable the SC538HGS to achieve high Full Well Capacity (FWC) and high Signal-to-Noise Ratio (SNR). The maximum SNR of the SC538HGS is up to 42.17dB, which is better than similar products in the industry. Higher SNR can help cameras capture cleaner images, thereby improving industrial inspection and recognition speed. Low Power ConsumptionThe high sensitivity performance of the SC538HGS can significantly reduce the fill light energy consumption of cameras during operation, which can not only effectively decrease the heating of the industrial cameras, but also cut down the overall operating power consumption.High Speed and Multiple InterfacesSC535HGS supports both LVDS and MIPI interface, which allows for flexible, quick image data transmission. In addition, as a 5MP high-resolution image sensor, SC538HGS also has high Parasitic Light Sensitivity (PLS) of over 40000 and high frame rate of 80fps, which can help industrial cameras quickly and smoothly capture clear, stable, high-quality images, so as to ensure the visual inspection efficiency of industrial production lines in high-speed operation. Typical Industrial Applications<div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1723186311672874267.png"/></div>Indoor Motion CaptureIn order to ensure the accuracy and reduce the interference of complex environmental light, the trajectory capture of indoor sports such as indoor golf and curling is usually achieved by near-infrared cameras. As a global shutter image sensor, the SC538HGS has high sensitivity in the near-infrared wavelength, which can fully meet the needs of such indoor motion trajectory capture, and ensure that the trajectory capture is accurate, clear and distortion-free.New Energy Materials InspectionThe SC538HGS, equipped with Lightbox IR®, has obvious advantages in the inspection of new energy materials. For example, the laser wavelength used in the industrial inspection of new energy photovoltaic panels is close to 950nm, and the self-luminous wavelength of lithium battery substrate in industrial inspection is close to 750nm. SC538HGS has excellent QE performance in these two wavelengths, which can significantly improve the sensitivity and imaging performance of industrial inspection cameras. <div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1723186327368568684.png"/></div>SC538HGS is sampling now and will be mass-produced in Q3 2024. For more information or to request a sample, please contact SmartSens Sales Representatives: <a href="mailto:cs@smartsenstech.com">cs@smartsenstech.com</a>. About SmartSens Technology (Shanghai) Co., Ltd. SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213) is a high-performance CMOS image sensor (CIS) chip design company. It is headquartered in Shanghai and has research centers in many cities around the world. SmartSens has been dedicated to pushing forward the frontier of imaging technology and growing in popularity among customers since it was established. SmartSens’ CMOS image sensors provide advanced imaging solutions for a broad range of areas such as surveillance, machine vision, automotive and cellphone cameras. SmartSens is committed to continuous innovation of products and fueling growth in numerous industries by delivering a more comprehensive portfolio of image sensors. Learn more at SmartSensTech.com.

SmartSens Announces 5MP Global Shutter Near-Infrared Enhanced CMOS Image Sensor for Industrial Machine Vision Cameras

Shanghai, China, June 27, 2024 SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213), a technologically-advanced CMOS image sensor supplier, recently announced SC130HS, a 13-MegaPixel (MP), 1/3.06-inch CMOS Image Sensor (CIS). As SmartSens’ first cellphone CIS to be made on the SmartClarity®-XL platform, SC130HS incorporates a 55nm Stacked BSI process and SmartSens’ advanced technologies including SFCPixel® and PixGain HDR®, enabling its high dynamic range, high frame rate, low noise, and low power consumption, thus bringing excellent image output for high-end smartphone front-facing cameras and mainstream smartphone main cameras. <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1724055844365376170.jpg"/></div>Main featuresClear imaging in day/night conditionsThe stacked BSI SC130HS image sensor features high sensitivity, high dynamic range, and low noise, which makes it ideal for image capture in day or night conditions. SmartSens’ proprietary SFCPixel® technology provides improvements in the sensor’s light sensitivity. Compared with similar BSI image sensors, SC130HS achieves a 25% growth in sensitivity and a 12% rise in Quantum Efficiency (QE), enabling its clear image output even in low light conditions such as dark nights. <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1724055887078020452.jpg"/></div>SC130HS supports both PixGain HDR® and Staggered HDR (SHDR) modes, which allows it to retain more image highlight and shadow details, delivering image outputs with layers and rich details. <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1724055918620469951.jpg"/></div>To improve image quality, SC130HS supports two Correlated Multi-Sampling (CMS) modes, CMS2 and CMS4, which can reduce dynamic noise effectively. The Read Noise and PRNU are 22% and 38% less than other similar BSI image sensors respectively. At a temperature of 60℃, Dark Current (DC), white pixel, and DSNU are around 22%, 71%, and 57% lower than other similar BSI image sensors respectively. These result in the sensor’s precise and detailed image output, even when it&#x27;s recording long videos. Phase Detection AutoFocus (PDAF) SC130HS supports image output in various formats, including 13MP 60fps, 13MP 30fps@HDR, and 1080P 120fps or 720P 240fps for slow-motion videos. Meanwhile, SC130HS supports Phase Detection AutoFocus (PDAF), achieving fast and accurate autofocus even in low-light or moving scenes, thereby providing crisp image capture for smartphone cameras at users’ fingertips. Low power consumption Thanks to SmartSens’ advanced SmartClarity®-XL process and ultra-low power design, the power consumption of the SC130HS image sensor is around 12% lower than other similar BSI image sensors, which further helps reduce the overall power consumption of the smartphone. Moreover, SC130HS comes in a 5350μm*4350μm chip size, allowing for size shrinking of smartphone camera modules, thus saving space for smartphone hardware integration.“As SmartSens’ first cellphone CIS to be made on SmartClarity®-XL platform, SC130HS uses advanced technologies including hybrid-bond stacked BSI process, SFCPixel® and PixGain HDR®, enabling its high dynamic range, high frame rate, low noise, and low power consumption, thereby allowing for its high-quality image capture in various lighting conditions with multiple output format available,” said Dr. Yaowu Mo, Co-founder and Chief Technology Officer of SmartSens Technology. “In addition, SC130HS supports MIPI C-PHY and D-PHY interfaces with a maximum data transmission rate of 2.5Gbps/lane. Therefore, the new 13MP high-performance SC130HS image sensor is ideal for high-end smartphone camera systems, which further brings smartphone imaging capabilities to the next level.” <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1724055944297255090.png"/></div>SC130HS is sampling now and will be mass-produced in Q3 2024. For more information or to request a sample, please contact SmartSens Sales Representatives: cs@smartsenstech.com About SmartSens Technology (Shanghai) Co., Ltd. SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213) is a high-performance CMOS image sensor (CIS) chip design company. It is headquartered in Shanghai and has research centers in many cities around the world. SmartSens has been dedicated to pushing forward the frontier of imaging technology and growing in popularity among customers since it was established. SmartSens’ CMOS image sensors provide advanced imaging solutions for a broad range of areas such as surveillance, machine vision, automotive and cellphone cameras. SmartSens is committed to continuous innovation of products and fueling growth in numerous industries by delivering a more comprehensive portfolio of image sensors. Learn more at SmartSensTech.com.

SmartSens Announces New 13MP High-Performance CMOS Image Sensor for Smartphone Cameras

Shanghai, China, October 24, 2023 SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213), a technologically-advanced CMOS image sensor supplier, recently announced three new CMOS image sensors of SmartSens Advanced Imaging (AI) Series, the 2-MegaPixel (MP) SC235AI, the 4MP SC435AI, and the 8MP SC835AI. Leveraging SmartSens’ advanced technologies including SmartClarity®-3 and Lightbox IR®, the three BSI image sensors provide superior performance in low light imaging, imaging at high temperatures, low power consumption, etc., which makes them ideal for camera upgrades of AIoT and security applications. <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1699260837627392935.png"/></div>Main features Low light imagingSC235AI, SC435AI, and SC835AI utilize SmartClarity®-3 and Lightbox IR® to achieve enhanced imaging performance in low-light or dark environments. SmartSens’ proprietary SFCPixel® technology and the BSI pixel structure equip the three sensors to achieve growth in sensitivity and Quantum Efficiency (QE). At the 520nm wavelength of visible light, the QE of SC235AI and SC435AI are more than 22% and 28% higher than their predecessors, respectively. In the meantime, Lightbox IR® provides significant improvement in the sensors’ Near-Infrared (NIR) sensitivity via processes including Optical Modulator (OM) and Deep Trench Isolation (DTI), and hence reduced pixel crosstalk. Compared with its predecessor, SC835AI has a 75% jump in QE at the 850nm wavelength, and a 94% surge in QE at the 940nm wavelength, enabling its clear, accurate image capture in low light conditions.<div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1699260836881943833.png"/></div>The three new sensors support 2-exposure staggered HDR mode. SC835AI has a 3dB rise in dynamic range and a 28% fall in Read Noise (RN) when compared with its predecessor, yielding its image output with highlight and shadow details even in strong light/illumination environments. In addition, SmartSens’ upgraded color process brings image outputs with vivid colors. <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1699260836969193167.png"/></div>Imaging at high temperaturesUsing SmartSens’ advanced technologies such as ultra-low noise readout circuit, etc., the three sensors deliver optimized imaging performance at high temperatures. At a temperature of 80°C, SC835AI has significant reductions of 39% in DarkCurrent (DC), 69% in Dark Shading, and 49% in White Pixel (WP) when compared with its predecessor, thereby enabling its high-quality, stable image output in high-temperature environments. <div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1699260837175395876.png"/></div>Low power consumptionThe precise control of internal modules equips the three sensors to achieve low power consumption. At a frame rate of 30fps, the power consumption of SC835AI is less than 204mW, which effectively saves power and reduces the heat of the whole camera during all-day operation. “The SC235AI, SC435AI, and SC835AI image sensors, containing two digits ‘35’, are named after SmartSens’ first best-selling security CIS, SC1035,” said Ms. Peiling Zhang, Chief Marketing Officer at SmartSens Technology. “The three new sensors utilize SmartClarity®-3 and Lightbox IR® to achieve superior performance in low light imaging, imaging at high temperatures, low power consumption, etc., which are ideal for camera upgrades of AIoT and security applications. SmartSens is now on a mission to develop more high-performance CIS solutions that end with ‘35AI’, helping to drive the improvement of AIoT and security industry.”<div class="media-wrap image-wrap"><img id="" title="" alt="" loop="" autoplay="" controls="" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1699260837219156788.png"/></div>SC235AI, SC435AI, and SC835AI are sampling now and will be mass-produced in Q1 2024. For more information or to request a sample, please contact SmartSens Sales Representatives: cs@smartsenstech.com About SmartSens Technology (Shanghai) Co., Ltd.SmartSens Technology (Shanghai) Co., Ltd. (SSE STAR MARKET: 688213) is a high-performance CMOS image sensor (CIS) chip design company. It is headquartered in Shanghai and has research centers in many cities around the world. SmartSens has been dedicated to pushing forward the frontier of imaging technology and growing in popularity among customers since it was established. SmartSens’ CMOS image sensors provide advanced imaging solutions for a broad range of areas such as surveillance, machine vision, automotive and cellphone cameras. SmartSens is committed to continuous innovation of products and fueling growth in numerous industries by delivering a more comprehensive portfolio of image sensors. Learn more at SmartSensTech.com.

SmartSens Adds Three New CMOS Image Sensors to Its AI Series for AIoT and Security Applications

The 52nd International Consumer Electronics Show (CES) attracted more than 4,400 companies to Las Vegas, and many AIoT (AI + IoT) products and solutions were unveiled. To meet the needs of the current AIoT market trend, SmartSens, a leading supplier of high-performance CMOS image sensors, released the SC4238, its latest 4 megapixel 1/3-inch CMOS image sensor. SmartSens’ combined leading BSI (back-illuminated) pixel process technology and excellent cost/performance ratio, make the SC4238 an excellent choice for the home IoT monitoring and mainstream consumer camera and professional camera markets.<div class="media-wrap image-wrap align-center" style="text-align:center"><img class="media-wrap image-wrap align-center" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1605176874088448153.jpg"/></div>“AIoT” is not only an inevitable trend of IoT, but also provides excellent intelligent upgrades to traditional industries. For example, analysts predict that the global smart home market will reach over 74 billion USD in 2021. With the rapid development of AIoT, the needs for human-computer interaction are slated to increase. High-quality CMOS image sensor products play an essential part in supporting and enhancing the performance of AIoT. With its extensive experience in security and surveillance monitoring, SmartSens has developed the SC4238 image sensor with professional-grade security product standards.The powerful performance of SC4238 will enable the AIoT ecosystem and its various applications.1. 4MP resolution video output2688H*1520V effective resolution output is the mainstream product configuration for current home IoT monitoring as well as the consumer camera and professional camera markets.2. Mainstream 1/3-inch optical sizeSC4238 uses BSI pixel technology to achieve a 2.0μm pixel structure and the mainstream 1/3-inch optical size, with sensitivity of up to 2800mV/Lux*s and maximum signal-to-noise ratio of 39dB. SC4238 is highly adaptable and can be used in many fixed focal length lenses, as well as zoom lenses and wide field lenses.3. 2-Exp HDR at 60fps output supportSC4238 delivers great imaging quality in low illumination and highly complex environments. It supports a high dynamic range, with a wide dynamic range up to 100dB in HDR mode and features near-infrared (NIR) enhancement, which can effectively improve the quantum efficiency of the 850nm to 940nm band.4. Excellent SNR1 ratioCompared with other 1/3-inch 4 megapixel HDR products in the current market, SC4238 has the advantage of high quality, good performance under ultra-low light condition — SNR 0.47 vs 1.22, which is about 2.6 times better performance than our competitor.<div class="media-wrap image-wrap"><img class="media-wrap image-wrap" src="https://smartsens.oss-cn-beijing.aliyuncs.com/web/img/1605176911559362360.jpg"/></div>The launch of SC4238 marks SmartSens’ focus on the field of AIoT applications. As one of the leading image sensor companies in the AIoT era, SmartSens’ products have been widely used in autonomous driving, face recognition, machine vision and other trending applications.

SmartSens Launched SC4238: 4 Megapixel 1/3-inch CMOS Image Sensor for AIoT Applications

Related News